www.sunled.com published date : mar 22,2008 drawing no : sdsa 6547 v1 checked : b.l.li u p.1/4 part number: LM2BB01W 10mm solid state lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LM2BB01W blue ingan water clear 3300 6990 458 10 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. features 10mm diameter big lamp. i.c. compatible. reliable and rugged. long life - solid state reliability. rohs compliant. preliminary spec m2bb (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 458 nm wavelength of dominant emission (typ.) (i f =20ma) d 465 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 22 nm capacitance (typ.) (v f =0v, f=1mhz) c 110 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bb (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 1000 v lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds electrostatic discharge threshold (hbm) attention observe precautions for handling electrostatic discharge sensitive devices
www.sunled.com published date : mar 22,2008 drawing no : sdsa 6547 v1 checked : b.l.li u p.2/4 part number: LM2BB01W 10mm solid state lamp ? m2bb
www.sunled.com published date : mar 22,2008 drawing no : sdsa 6547 v1 checked : b.l.li u p.3/4 part number: LM2BB01W 10mm solid state lamp remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : mar 22,2008 drawing no : sdsa 6547 v1 checked : b.l.li u p.4/4 part number: LM2BB01W 10mm solid state lamp packing & label specifications LM2BB01W
|
